Why does my chainsaw chain dull so quickly?

Why does my chainsaw chain dull so quickly?

You may be putting to steep of an angle on the cutters, which will dull quickly. You’re rakers may be too far down, which will contribute to a quick dulling chain. You may be cutting dirty wood. You may be slightly touching the ground with the tip of the bar.

What is the difference between .325 and 3/8 chain?

The . 325 may be smaller and faster, but it may not be your best bet for your everyday needs. The three-eighths-inch chain is durable and lasts longer than its smaller cousin. This makes it one of the more popular switches for chainsaw users who want to get more out of their saw.

What is the fastest cutting chainsaw chain?

Re: The fastest cutting chain

• Fastest cutting is Square ground chisel chain such as the Oregon CJ & CK. This chain is sharpened with a square, not round file and is not something most, non professional folks mess with.
• Next fastest is round filed, chisel chain.
• Lastly is Semi-chisel, example being Oregon DP or DJ.

What size file do I need for a 3/8 chain?

It is vital to use the right size file. In general, 1/4- and 3/8-inch-pitch, low-profile chains call for a 5/32-inch file; 0.325-inch-pitch chains require a 3/16-inch file; and standard 3/8-inch-pitch and 0.404-inch-pitch chains demand a 7/32-inch file.

What is the correct file size for .325 Stihl chain?

5/32-inch

What size file do I need for a Stihl MS 170?

This sharpening kit is for the 0.325 in. STIHL chains and the file size is 5/32 in.

How many times can you sharpen a chainsaw chain?

More Sharpening Tips Cutters can be sharpened up to 10 times or more before the chain needs replacing. If your cutters are worn unevenly after a few sharpenings, a professional can regrind them to uniform shape.

What angle should I sharpen my Stihl chainsaw chain?

30°

Why does my chainsaw chain keep getting tight?

Re: Chain tightens by itself Sounds like the bar’s sprocket nose may be wore out or broken . A roller bearing may have popped out and is spreading the nose or jammingthe chain up. Check to see if the sprocket nose on the bar is same pitch as rim sprocket and chain. All 3 have to match.

How often should I flip my chainsaw bar?

So after cutting, say, 2 cord or so, flip your bar. Every 4 or 5 cord, clean your rails……you’ll be amazed at the difference it’ll make.

Is it worth sharpening a chainsaw?

Keep the oil flowing too to keep from overheating the chain. A hot, unlubricated chain will wear out quicker and drastically shorten its life. Well worth it to sharpen your chains yourself.

What should you not do with a chainsaw?

Don’t Cut on the Ground When Using a Chainsaw Cutting on or near the ground puts you at risk for sinking the bar into the dirt. When learning how to use a chainsaw safely, one of the first things you should do is make sure to make your cuts off the ground.

How do you know when your chainsaw needs sharpening?

💡Here’s telltale sign that your chainsaw needs sharpening. Examine the wood being expelled by the saw. A sharp chainsaw sprays out thin shavings. A dull saw spews out fine wood dust.

How long should a chainsaw stay sharp?

That’s an important question, and the condition of your chain has a big impact on the performance and safety of your chainsaw. So, how long does a chainsaw chain last? A chainsaw chain can last for 5+ years with frequent use. For occasional users, a chain could last for decades.

Can you run a chainsaw without the bar?

There is no reason to run without bar and chain.

Can you straighten a chainsaw bar?

Solid body bars with replaceable noses can be straightened by hammering with the bend peak up on a flat anvil. Laminated bars need a piece of rubberized belting of approximate 1/4″ thickness between bar and anvil to properly hammer straighten .

What causes a chainsaw to not cut straight?

Uneven cutting teeth is often the cause. If the chain is cutting to the left that means the right teeth on the chain are longer, and vise versa. To correct, sharpen only the side with the longer teeth. If the bar has worn unevenly it will also cause the chain to not cut straight.

Why does my chainsaw cut crooked?

Uneven top plates can cause a chain to cut crooked. It’s important to keep all top plates equal length. Dull cutters damaged by rocks can cause a chain to cut crooked. It’s important to remove all damage from cutters prior to cutting.

Why does my chainsaw bar smoke?

While a chain saw does produce some heat while in use, it should never overheat or begin smoking. The most likely causes of smoking and overheating are a lack of air and/or a lack of lubrication to the engine or the chain saw chain guide bar.

Will cutting wet wood dull a chainsaw?

Using your chainsaw to cut through wet wood will not dull the chain any faster than using it for other types of wood. When you think about it, your chainsaw chain is already wet. Using your chainsaw to cut through wet wood will not change the efficiency of your chainsaw.

Is it OK to use a chainsaw in the rain?

Winter is rapidly approaching, and with it, wet conditions. Cutting wood in rain or snow is okay for your saw: If you’re nervous about your saw getting wet, don’t worry. Gas powered chainsaws are perfectly okay to use in wet weather; the same is true for the log itself.

Why is my chainsaw running so hot?

Chainsaw engines run at high temperatures, usually in the summer, so they can quickly overheat. The cylinder and starter both contain air intake areas that pull cool outside air into the engine when it’s running. If dust, wood chips or other material blocks these systems, the engine will start to overheat.

Why won’t my chainsaw start when it’s hot?

Typically when a chainsaw wont start when warmed but starts and runs fine when cool, it’s because the air/fuel ratio is too rich (too much fuel). It starts fine when cold because extra fuel is the same as using a choke. When it’s warm and still too much fuel, it’s flooding.

Why is my chainsaw burning the wood?

If the oil pump for the bar oil is not pumping oil on to the bar it will cause the chain and the bar to get very hot. If this is happening, it may cause the wood to burn. The only other thing I can come up with is the chain may be very dull or on backwards.